GPSmap 276Cx Firmware update

De GPSmap 276CX, opvolger van de GPSmap 276C
Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

Well, to my experience management likes to see graphs showing 'tickets' being quickly closed. That's why tickets tend to speed up answers, not necessarily solutions.

It seems 1 such example already arrived.
A feature? I fail to see why someone would want to switch off the big compass rotation but leave the function running?

But perhaps I'm comparing it too much with my 60CSx where the magnetic compass can be fully switched OFF or ON, and that includes switching OFF the 'big' compass as well as the heading field.
Anyhow, let's not be too pessimistic and indeed hope for proper action from Garmin's side. After all the tickets are there and probably answers will follow.

Meanwhile you did achieve quite something.
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

ConiKost
Berichten: 195
Lid geworden op: 17 aug 2020 18:23

Re: GPSmap 276Cx Firmware update

Bericht door ConiKost »

tony rave schreef:
26 okt 2020 16:12
Well, to my experience management likes to see graphs showing 'tickets' being quickly closed. That's why tickets tend to speed up answers, not necessarily solutions.
Thats quite possible. I am also not enthusiastic here.
tony rave schreef:
26 okt 2020 16:12
It seems 1 such example already arrived.
A feature? I fail to see why someone would want to switch off the big compass rotation but leave the function running?
I guess, that's Garmin logic. Also in other Garmin devices, that seems to be more in other places too, that disabling an option doesn't do that in 'every place'. At least it's just a minor thing, so it shouldn't bother.
tony rave schreef:
26 okt 2020 16:12
But perhaps I'm comparing it too much with my 60CSx where the magnetic compass can be fully switched OFF or ON, and that includes switching OFF the 'big' compass as well as the heading field.
Anyhow, let's not be too pessimistic and indeed hope for proper action from Garmin's side. After all the tickets are there and probably answers will follow.
Let's hope, that this will not take ages for fix some bugs are at least something will happen.
Beeline Moto II (FW 4.2.400, HW 9.5.2)
Garmin DriveSmart 86 MT-D (FW 7.70, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 23.30, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)

ConiKost
Berichten: 195
Lid geworden op: 17 aug 2020 18:23

Re: GPSmap 276Cx Firmware update

Bericht door ConiKost »

Does anyone uses the Garmin tempe sensor or other ANT devices with the 276Cx?

Since I have a done full reset on my firmware 5.10, I need to pair again the tempe sensor.
But I am unable to do so, as the 276Cx doesn't start the pairing process.

In order to start the pairing process, I go to the main menu "Setup" and choose tab "ANT Sensor".
Since I did a reset, "Tempe Sensor" is set to "Off" by default.

If I choose now "On" or "Search For New", it does nothing. It falls directly back to "Off".
The normal behavior would be instead of falling to "Off" to show "Searching" and after a few seconds the pairing should be complete.

I can observe the same behavior on all other ANT device options (Bike Speed, Bike Candence, Heart Rate), all stay "Off", when choosing "On" or "Search For New".

Is this a firmware bug in version 5.10 or is my 276Cx defective?
Can anyone reproduce that on firmware 5.10?
Beeline Moto II (FW 4.2.400, HW 9.5.2)
Garmin DriveSmart 86 MT-D (FW 7.70, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 23.30, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)

Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

I don't have any ANT devices and I didn't do a full reset on v5.10 and mine behaves the same.
Entering ON or Search For New, the Temp Sensor field falls back to Off, same for the other 3.
Only VIRB accepts the ON position.
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

ConiKost
Berichten: 195
Lid geworden op: 17 aug 2020 18:23

Re: GPSmap 276Cx Firmware update

Bericht door ConiKost »

tony rave schreef:
29 okt 2020 20:03
I don't have any ANT devices and I didn't do a full reset on v5.10 and mine behaves the same.
Entering ON or Search For New, the Temp Sensor field falls back to Off, same for the other 3.
Only VIRB accepts the ON position.
Yes, that's exactly the same behauvior as mine including VIRB. Thank you for testing and confirming. So my 276Cx is not defective, as it seems.
So it seems, that Garmin broke ANT completly with firmware 5.10 :-(

With firmware 4.80, I was able to pair and use my Tempe sensor.
And, as I remember correctly, you coudn't just enable VIRB, as it wanted to pair.
Beeline Moto II (FW 4.2.400, HW 9.5.2)
Garmin DriveSmart 86 MT-D (FW 7.70, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 23.30, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)

Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

ConiKost schreef:
29 okt 2020 20:08
So it seems, that Garmin broke ANT completly with firmware 5.10.
Yes, they keep their traditions up :mrgreen: .
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

ConiKost
Berichten: 195
Lid geworden op: 17 aug 2020 18:23

Re: GPSmap 276Cx Firmware update

Bericht door ConiKost »

tony rave schreef:
29 okt 2020 20:22
ConiKost schreef:
29 okt 2020 20:08
So it seems, that Garmin broke ANT completly with firmware 5.10.
Yes, they keep their traditions up :mrgreen: .
:mrgreen: :mrgreen: :mrgreen:

I will report that tomorrow for Garmin.
Laatst gewijzigd door ConiKost op 30 okt 2020 09:28, 1 keer totaal gewijzigd.
Beeline Moto II (FW 4.2.400, HW 9.5.2)
Garmin DriveSmart 86 MT-D (FW 7.70, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 23.30, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)

ConiKost
Berichten: 195
Lid geworden op: 17 aug 2020 18:23

Re: GPSmap 276Cx Firmware update

Bericht door ConiKost »

I have to correct, apprently only pairing with new ANT devices is broken. If you have already paired an ANT device on a older firmware and upgraded afterwards to firmware 5.10 without reset, the paired ANT devices will continue to work. But you can't pair a new one.
Beeline Moto II (FW 4.2.400, HW 9.5.2)
Garmin DriveSmart 86 MT-D (FW 7.70, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 23.30, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)

Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

ConiKost schreef:
29 okt 2020 20:25
I will report that tomorrow for Garmin.
In support of your request of yesterday I sent below text to Support_NL this morning.

"Since firmware update version 5.10 I notice that the setup-menu for ANT devices does not work as before.
Try this:
Select Setup / Select ANT sensor / Select Tempe Sensor / [Enter] / Select ON or Search For New / [Enter]
You'll notice that the Tempe Sensor field falls back to OFF, the selected option is not accepted.
The same behaviour is noticed for Heart Rate Monitor, Bike Speed Sensor and Bike Cadence Sensor.
"
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

Vandaag een grote cirkel rondom de Rursee (Eifel) gereden.

Wanneer het beeld overschakelt van het normale kaartscherm naar het popup-scherm (afslag popup) zag ik een enkele maal (2 of 3 keer op de gehele dag) dat de linkerhelft van het popup-scherm even geheel blauw gekleurd was. Een fractie van een seconde later verschijnt dan de afslag situatie in beeld.

Dit is me voorheen nooit opgevallen en ik denk dat het pas ontstaan is na de laatste firmware update naar 5.10.
Het is maar een kleinigheidje en eigenlijk het vermelden niet waard, stoort ook absoluut helemaal niet.
Zover ik mij herinner was de vorige situatie dat de overschakeling van normaal kaartscherm naar pop-up kaartscherm altijd naadloos gebeurde, dus zonder dat zeer korte momentje blauw op de linkerhelft van het pop-up scherm.

Verder geen bijzonderheden of veranderingen opgemerkt tijdens deze eerste rit met versie 5.10. Mijn standaard navigatie (uitsluitend directe routes inladen, track en door toestel berekende route tonen) werkt zoals altijd zonder problemen.
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

ConiKost
Berichten: 195
Lid geworden op: 17 aug 2020 18:23

Re: GPSmap 276Cx Firmware update

Bericht door ConiKost »

I had this with 'all blue' in older firmware versions too.
Also drove today a longer tour. The only problem I noticed, after a few hours the 276Cx stopped audio via bluetooth. Reconnect didn't help and device claimed to be still connected. Restart of whole unit helped.
Beeline Moto II (FW 4.2.400, HW 9.5.2)
Garmin DriveSmart 86 MT-D (FW 7.70, HW V8, GPS 9.00.50, 32GB SD)
Garmin Montana 750i (FW 23.30, HW V6, GPS 2.90, Touchscreen 85.07, ​64GB SD)

Gebruikersavatar
Noppie
WayPoint relatie
WayPoint relatie
Berichten: 409
Lid geworden op: 23 mar 2004 19:59
Locatie: Doetinchem

Re: GPSmap 276Cx Firmware update

Bericht door Noppie »

De mijne deed dat met dat blauwe scherm ook voor de firmware update heel af en toe al. Heb er na de update nog niet mee gereden.
Beter één wiel op de grond dan twee in de lucht.

Zumo XT2 op Yamaha FJR1300AS en Triumph Trophy 900 caféracer

Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

Bedankt voor deze informatie. Het is dus niet nieuw en ik heb 5.10 ten onrechte hiervan beschuldigd.
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

Gebruikersavatar
radja
WayPoint relatie
WayPoint relatie
Berichten: 99
Lid geworden op: 5 jul 2009 21:33
Locatie: Beesd

Re: GPSmap 276Cx Firmware update

Bericht door radja »

Ondanks dat ik die pop-up bij de 4.10 versie maar heel af en toe ingeschakeld had, heb ik dat blauwe scherm nooit gezien.
In de 5.10 versie zie ik dat blauwe scherm i.i.g. wel.

Ik heb de nieuwe 276Cx afgelopen maandag al weer ontvangen en uiteraard eerst alle instellingen, zo als ik gewend was, ingesteld en met de oude software versie (4.10) geprobeerd. Bluetooth connectie met de helm set was in een mum van tijd werkend. Alle aanwijzingen kwamen goed door.
Toen de 5.10 versie geïnstalleerd. En wat schetste mijn verbazing: geen gesproken aanwijzingen. Na van alles uitgeprobeerd te hebben, kwam ik er toevallig achter, dat de door mij geactiveerde stem (Nederlands, Lieke) in 5.10 verdwenen is. Alle andere stemmen komen luid en duidelijk door, maar Lieke niet. :cry:
En zij was degene die niet de straatnamen opnoemde.
Heb e.e.a. uitgeprobeerd met een gesimuleerde route (dus GPS uit).
Zijn er meer die dit hebben?
Je hebt geen therapeut nodig, als je motor rijdt.

Gebruikersavatar
tony rave
WayPoint relatie
WayPoint relatie
Berichten: 2122
Lid geworden op: 1 dec 2004 14:33
Locatie: View over Baltic Sea

Re: GPSmap 276Cx Firmware update

Bericht door tony rave »

Je kunt die Lieke (Lieke.vpm en Lieke.sum) terughalen uit de backup die je (hopelijk) ooit gemaakt hebt van een nieuw toestel en terugzetten in de Garmin/Voice/folder.
Of ze dan weer snatert?
Ж BaseCamp ► route-creatie & databeheer ║ auto-route & track & directe-route ► GPSMap's 60CSx, 79S, 276Cx, Nokia XR20 Ж

Plaats reactie

Terug naar “GPSmap 276Cx”